NXP Semiconductors MCU LPC11U6x ARM Cortex-M0+ de 32 bits

A familia LPC11U6x 32-bit ARM Cortex-M0+ da NXP cria a facilidade de utilização e flexibilidade de design do premiado NXP’s, portfólio pemiado de LPC11Uxx com uma variedade de características aprimoradas, incluindo um ARM® mais energicamente eficiente; núcleo Cortex™-M0+, significativamente mais rápido e SRM, mais comunicações seriais, um novo 2-Msps ADC e temporizadores mais versáteis. Esses recursos adicionais permitem que o LPC11U6x viabilize uma ampla gama de aplicações em mercados de consumo comerciais e industriais, tais como medição e coleta de dados, roteamento com e sem fio, equipamentos médicos portáteis, acessórios para PC e jogos, dentre outros. O LPC11U6x amplia opções de memória, dobrando o flash para 256 KB e triplicando o SRAM para 36 KB. Os mais exigentes requisitos de E/S são suportados pela conectividade serial estendida, incluindo 5 USART (receptores/transmissores síncronos/assíncronos universais), 2 barramentos I2C, 2 SPI (interfaces de porta serial) e até 80 GPIO (pinos de E/S de finalidade geral), junto com um novo conversor analógico a digital (ADC) com 12 canais, de 2 Msps e 12 bits para maior largura de banda e entrada de maior precisão.

Recursos

System
- Cortex-M0+ processor, running at frequencies of up to 50MHz
- Cortex-M0+ built-in nested vectored interrupt controller (NVIC)
- Serial wire debug (SWD) and JTAG boundary scan modes supported
- System tick timer
Memory
- Up to 256KB on-chip flash programming memory with page erase
- Up to 32KB main SRAM
- Up to two additional SRAM blocks of 2KB each (LPC11U6x parts)
- Up to 4KB EEPROM
- In-System programming (ISP) and In-Application programming (IAP)
Digital peripherals
- Simple DMA engine with 16 channels and programmable input triggers (LPC11U6x)
- Up to 80 General purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors
- Pin interrupt and pattern match engine using eight selectable GPIO pins (LPC11U6x)
- Two GPIO interrupt generators (LPC11U6x)
- CRC engine (LPC11U6x)
- Programmable windowed watchdog timer (WDT)
- Up to four 32-bit and two 16-bit counter/timers or two 32-bit and six 16-bit counter/timers
- Up to 21 match outputs and 16 capture inputs
- Up to 19 PWM outputs with 6 independent time bases
Analog peripherals
- One 10/12-bit ADC with up to 12 input channels and sample rates of up to 2 Msample/s
- Temperature sensor (LPC11U6x)
Serial interfaces
- USB 2.0 full-speed device controller. XTAL-less low-speed mode supported
- Up to five USART interfaces with RS-485 mode support
- Up to two SSP controllers
- Up to two I2C-bus interfaces

Clock generation
- 12MHz internal RC oscillator trimmed to 1 % accuracy that can optionally be used as a system clock
- Crystal oscillator with an operating range of 1MHz to 25MHz
- Programmable watchdog oscillator
- PLL allows CPU operation up to the maximum CPU rate without the need for a high-frequency crystal
- A second, dedicated PLL is provided for USB
- Clock output function with divider that can reflect the crystal oscillator clock, the main clock, the IRC, or the Watchdog oscillator
Power control
- Integrated PMU (Power Management Unit) to minimize power consumption
- Power profiles residing in boot ROM provide optimized performance and minimized power consumption for any given application through one simple function call
- Four reduced power modes: Sleep, Deep-sleep, Power-down and Deep power-down modes
- Processor wake-up from Deep-sleep and Power-down modes on external pin inputs
- Power-On Reset (POR)
- Brownout detect
Additional features
- Unique device serial number for identification
- Single power supply (1.8V to 3.6V - LPC11U1x, LPC11U2x and LPC11U3x) (2.4V to 3.6V - LPC11U6x)
- Available as LQFP48, LQFP64, LQFP100, TFBGA48 and HVQFN33 packages
- Real-time clock (RTC) in the always-on power domain with separate battery supply pin and 32kHz oscillator (LPC11U6x)