HV9805MG-G

Microchip Technology
689-HV9805MG-G
HV9805MG-G

Fabricante.:

Descrição:
CIs de driver de iluminação LED High Voltage LED Driver

Modelo ECAD:
Baixe o aplicativo gratuito Library Loader para converter este artigo para sua ferramenta ECAD. Saiba mais sobre o Modelo ECAD.

Disponibilidade

Estoque:
Não estocado
Tempo de entrega da fábrica:
23 semanas Tempo estimado de produção de fábrica.
Mínimo: 2500   Vários: 2500
Preço unitário:
$-.--
Ext. Preço:
$-.--
Est. Tarifa:

Preços (USD)

Qtde Preço unitário
Ext. Preço
Bobina cheia (pedidos em múltiplos de 2500)
$0.525 $1,312.50

Atributo de produto Valor do atributo Selecionar atributo
Microchip
Categoria de produto: CIs de driver de iluminação LED
RoHS:  
1 Output
Boost
700 mA
MSOP-10
8.6 V
7.9 V
100 kHz
Adjustable
- 40 C
+ 150 C
Overvoltage Protection
Reel
Marca: Microchip Technology
Tensão de entrada: 7.9 V to 8.6 V
Sensível à umidade: Yes
Estilo de montagem: SMD/SMT
Número de canais: 1 Channel
Pd - Dissipação de potência: 625 mW
Produto: LED Drivers
Tipo de Produto: LED Lighting Drivers
Quantidade do pacote de fábrica: 2500
Subcategoria: Driver ICs
Tensão de alimentação - Máx: 5 mA
Peso unitário: 143.200 mg
Produtos encontrados:
Para mostrar produtos similares, selecione pelo menos uma opção
Selecione pelo menos uma caixa de seleção acima para mostrar produtos similares nesta categoria.
Atributos selecionados: 0

Esta funcionalidade requer o JavaScript para ser habilitada.

CNHTS:
8542399000
CAHTS:
8541210000
USHTS:
8541210095
JPHTS:
8541210101
KRHTS:
8541219000
TARIC:
8541210000
MXHTS:
85412101
ECCN:
EAR99

HV9805 High Voltage LED Driver

Microchip Technology HV9805 High Voltage LED Driver is targeted at general LED lighting products, such as LED lamps and LED lighting fixtures with a maximum power rating of  25W at 120VAC and  50W at 230VAC. The HV9805 is ideal for driving a high voltage LED load, offering cost advantages in terms of heat management and optics.

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.