ADL2012 Wound Ferrite Inductors

TDK ADL2012 Wound Ferrite Inductors offer a compact size, thin form factor, a wide operating temperature range, and AEC-200 compliance. These inductors feature an original coiled wiring design and original structure that achieves broadband impedance and good DC superimposition characteristics. The completely automated manufacturing process ensures consistent high quality and reliability. With a mounting area of 2.2mm x 1.25mm and a maximum height of 1.75mm, these TDK ADL2012 inductors are suitable for space-constrained applications. The series is also ideal for use with a separate signal and for power lines in in-vehicle power-over-coax (PoC) applications.

Resultados: 2
Selecionar Imagem Número de peça Fabricante Descrição Ficha técnica Disponibilidade Preços (USD) Filtrar os resultados na tabela por preço unitário baseado na sua quantidade. Qtde RoHS Modelo ECAD Caixa / Gabinete Indutância Tolerância Corrente DC máxima Resistência DC máxima Corrente de saturação Temperatura operacional mínima Temperatura operacional máxima Frequência auto-ressonante Terminação Comprimento Largura Altura Material básico Série Embalagem
TDK Indutores de potência - SMD 0.8uH,0.6A,0.12ohm,-40-135C 3,920Em estoque
Mín.: 1
Mult.: 1
Bobina: 2,000

0805 (2012 metric) 800 nH 20 % 1 A 120 mOhms 1.8 A - 40 C + 135 C 700 MHz Standard 2.2 mm 1.25 mm 1.65 mm Ferrite ADL2012 Reel, Cut Tape, MouseReel
TDK Indutores de potência - SMD IND,4.4uH, 0.65A, 0.9ohm, -40-135C
4,000Esperado 16/02/2026
Mín.: 1
Mult.: 1
Bobina: 2,000

4.4 uH 20 % 900 mOhms 650 mA - 40 C + 135 C 260 MHz Standard 2.2 mm 1.25 mm 1.25 mm Ferrite ADL2012 Reel, Cut Tape, MouseReel